Construction and flooring
Industrial floors, self-levelling coats, repair compounds and grouts.
Pairs with: Cycloaliphatic amines, phenalkamines
Ask about flooring
Epoxy curing agent supplier in Bengaluru
Epoxy hardeners and resins, matched to your application
The wrong hardener shows up later as a soft floor, a cloudy pour or a coating that fails in the monsoon. SuperFirst Chemicals helps flooring contractors, waterproofing applicators, furniture makers and manufacturers across India choose the right epoxy resin and curing agent for the job, then backs it with datasheets, samples and a quote within 24 hours.
- Help choosing the right system
- TDS and SDS upfront
- Samples before you order
- Delivery across India
Find the right hardener family
Select your end use:
Pick an end use above to see which hardener families usually suit it. Our technical team confirms the final choice for your resin, pot life and cure conditions.
Epoxy for flooring
- Good strength and easy to apply
- Complete system: primer, base coat and top coat
- Top coat adds gloss and an extra protective layer
- Available in pack sizes to suit your requirement
Epoxy for waterproofing
- Excellent adhesion to concrete
- Protects against water and dampness
Epoxy for wood, furniture and art
- Crystal clear
- Bubble-free
- High-gloss finish
Epoxy for electrical
- Casting, encapsulation and potting where cure speed matters
- High heat and chemical resistance
Epoxy for protective coatings
- Adhesion and flexibility for anticorrosive coatings
- Anticorrosive primers for steel in humid or cold sites
- Tough, solvent-free, high-build coatings
Epoxy for adhesives
- Fast, general-purpose bonding
- Tough, solvent-free bonds
2021Founded in Bengaluru
6Hardener families
5Industries served
24 hQuote response
Hardener selection guide
A quick comparison of the six hardener families we supply. Our team confirms the final choice for your resin, site and cure conditions.
| Hardener family | Main strength | Watch out for | Typical uses |
|---|---|---|---|
| Modified aliphatic amines | Fast room-temperature cure, good strength | Short pot life; can blush in high humidity | Adhesives, castings, fast-return floors |
| Modified cycloaliphatic amines | Light colour, gloss, clarity, good chemical resistance | Slower cure in cold conditions | Decorative floors, clear coatings, wood and furniture |
| Polyamides | Flexibility, strong adhesion, long pot life | Slower cure; lower chemical resistance | Protective and marine-type coatings, primers |
| Polyamidoamines | Low viscosity, good wetting, toughness | Slower cure than amines | Solvent-free coatings, adhesives, concrete primers |
| Phenalkamines | Cure in cold and humid conditions; tolerate damp surfaces | Darker colour, so not for light topcoats | Anticorrosive primers, waterproofing, repair floors |
| Phenolic curing agents | High chemical and heat resistance | Check the cure schedule on the TDS | Chemical-resistant linings, electrical, industrial parts |
Application support
Epoxy systems for five industries
Tell us your industry and process, and our technical team suggests the resin and hardener pair that fits your conditions and cure times.
Waterproofing and roofing
Roofs, water tanks and wet areas that cure in monsoon humidity.
Pairs with: Phenalkamines, polyamides
Ask about waterproofingFurniture and woodworking
River tables, table tops and clear, high-gloss coatings.
Pairs with: Cycloaliphatic amines
Ask about furnitureElectrical and electronics
Potting, encapsulation and insulation for components.
Pairs with: Aliphatic amines, phenolic curing agents
Ask about electricalIndustrial and protective coatings
Structural adhesives, castings and anticorrosive coatings for steel.
Pairs with: Polyamides, polyamidoamines, phenalkamines
Ask about coatingsFrom enquiry to delivery
You confirm the system works on your line or site before you place a commercial order.
Share your requirement
Application, quantity, and any pot life, viscosity, hardness or humidity conditions.
Get a recommendation
We suggest a resin and hardener system and send the TDS and SDS.
Test a sample
Run a trial on your production line or project site.
Receive your quote
Quote within 24 hours, with dispatch across India.
Not sure which hardener fits your job?
Send us your application and site conditions. We will recommend a system and send the datasheets within 24 hours.
Why buyers work with SuperFirst
SuperFirst Chemicals India Pvt Ltd was founded in 2021 in Bengaluru to give Indian applicators and manufacturers a supplier who helps them choose the right epoxy system, not just sell a drum.
A recommendation, not a catalogue
Tell us the job and conditions. We suggest the resin and hardener pair that suits it.
Datasheets upfront
TDS and SDS come with every recommendation, so you can check the fit before you buy.
Test before you commit
Try a sample on your line or site before placing a commercial order.
Quick, clear quotes
A quote within 24 hours, Monday to Saturday, with delivery across India.
Reply within 24 hours
Request a quote and datasheet
We reply Monday to Saturday, 9 am to 6 pm. For the most accurate recommendation, tell us:
- What you are making and the surface it goes on
- Site temperature and humidity
- Pot life and cure time you need
- Colour or clarity requirements
- Quantity per order or per month
Call or WhatsApp
+91 63619 22659
Email
sales@superfirstchemicals.com
Address
#60, 13th Main, BTM 2nd Stage, Bengaluru, Karnataka 560076
Epoxy curing agent supplier in Bengaluru
Epoxy hardeners and resins, matched to your application
The wrong hardener shows up later as a soft floor, a cloudy pour or a coating that fails in the monsoon. SuperFirst Chemicals helps flooring contractors, waterproofing applicators, furniture makers and manufacturers across India choose the right epoxy resin and curing agent for the job, then backs it with datasheets, samples and a quote within 24 hours.
- Help choosing the right system
- TDS and SDS upfront
- Samples before you order
- Delivery across India
Find the right hardener family
Select your end use:
Pick an end use above to see which hardener families usually suit it. Our technical team confirms the final choice for your resin, pot life and cure conditions.
Epoxy for flooring
- Good strength and easy to apply
- Complete system: primer, base coat and top coat
- Top coat adds gloss and an extra protective layer
- Available in pack sizes to suit your requirement
Epoxy for waterproofing
- Excellent adhesion to concrete
- Protects against water and dampness
Epoxy for wood, furniture and art
- Crystal clear
- Bubble-free
- High-gloss finish
Epoxy for electrical
- Casting, encapsulation and potting where cure speed matters
- High heat and chemical resistance
Epoxy for protective coatings
- Adhesion and flexibility for anticorrosive coatings
- Anticorrosive primers for steel in humid or cold sites
- Tough, solvent-free, high-build coatings
Epoxy for adhesives
- Fast, general-purpose bonding
- Tough, solvent-free bonds
2021Founded in Bengaluru
6Hardener families
5Industries served
24 hQuote response
Hardener selection guide
A quick comparison of the six hardener families we supply. Our team confirms the final choice for your resin, site and cure conditions.
| Hardener family | Main strength | Watch out for | Typical uses |
|---|---|---|---|
| Modified aliphatic amines | Fast room-temperature cure, good strength | Short pot life; can blush in high humidity | Adhesives, castings, fast-return floors |
| Modified cycloaliphatic amines | Light colour, gloss, clarity, good chemical resistance | Slower cure in cold conditions | Decorative floors, clear coatings, wood and furniture |
| Polyamides | Flexibility, strong adhesion, long pot life | Slower cure; lower chemical resistance | Protective and marine-type coatings, primers |
| Polyamidoamines | Low viscosity, good wetting, toughness | Slower cure than amines | Solvent-free coatings, adhesives, concrete primers |
| Phenalkamines | Cure in cold and humid conditions; tolerate damp surfaces | Darker colour, so not for light topcoats | Anticorrosive primers, waterproofing, repair floors |
| Phenolic curing agents | High chemical and heat resistance | Check the cure schedule on the TDS | Chemical-resistant linings, electrical, industrial parts |
Application support
Epoxy systems for five industries
Tell us your industry and process, and our technical team suggests the resin and hardener pair that fits your conditions and cure times.
Construction and flooring
Industrial floors, self-levelling coats, repair compounds and grouts.
Pairs with: Cycloaliphatic amines, phenalkamines
Ask about flooringWaterproofing and roofing
Roofs, water tanks and wet areas that cure in monsoon humidity.
Pairs with: Phenalkamines, polyamides
Ask about waterproofingFurniture and woodworking
River tables, table tops and clear, high-gloss coatings.
Pairs with: Cycloaliphatic amines
Ask about furnitureElectrical and electronics
Potting, encapsulation and insulation for components.
Pairs with: Aliphatic amines, phenolic curing agents
Ask about electricalIndustrial and protective coatings
Structural adhesives, castings and anticorrosive coatings for steel.
Pairs with: Polyamides, polyamidoamines, phenalkamines
Ask about coatingsFrom enquiry to delivery
You confirm the system works on your line or site before you place a commercial order.
Share your requirement
Application, quantity, and any pot life, viscosity, hardness or humidity conditions.
Get a recommendation
We suggest a resin and hardener system and send the TDS and SDS.
Test a sample
Run a trial on your production line or project site.
Receive your quote
Quote within 24 hours, with dispatch across India.
Not sure which hardener fits your job?
Send us your application and site conditions. We will recommend a system and send the datasheets within 24 hours.
Why buyers work with SuperFirst
SuperFirst Chemicals India Pvt Ltd was founded in 2021 in Bengaluru to give Indian applicators and manufacturers a supplier who helps them choose the right epoxy system, not just sell a drum.
A recommendation, not a catalogue
Tell us the job and conditions. We suggest the resin and hardener pair that suits it.
Datasheets upfront
TDS and SDS come with every recommendation, so you can check the fit before you buy.
Test before you commit
Try a sample on your line or site before placing a commercial order.
Quick, clear quotes
A quote within 24 hours, Monday to Saturday, with delivery across India.
Reply within 24 hours
Request a quote and datasheet
We reply Monday to Saturday, 9 am to 6 pm. For the most accurate recommendation, tell us:
- What you are making and the surface it goes on
- Site temperature and humidity
- Pot life and cure time you need
- Colour or clarity requirements
- Quantity per order or per month
Call or WhatsApp
+91 63619 22659
Email
sales@superfirstchemicals.com
Address
#60, 13th Main, BTM 2nd Stage, Bengaluru, Karnataka 560076